Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incoming Fax lines hunting to switchboard 1

Status
Not open for further replies.

Centerfielder

Technical User
Feb 9, 2006
34
CA
I have two analogue lines for incoming fax. When both are occupied the third call rings to reception. Current set up is below. Is there a setting I can change to stop this from happening? I would prefer a busy signal rather than annoy my receptionist. Thanks

TYPE: tnb
TN 0 0 9 2
DATE
PAGE
DES

DES BW
TN 000 0 09 02 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00000
WRLS NO
DN 760 0 MARP
CPND
NAME Beard Main Fax
XPLN 14
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 4109
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFR WTA THFD FND HTA ONS
LPR XRD AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR3 SHL ABDD CFHD
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTD
PLEV 02
PUID
FCAR YES
AACS NO
MLWU_LANG 0
DATE 15 NOV 2011


REQ: prt
TYPE: tnb
TN 0 0 9 6
DATE
PAGE
DES

DES BW
TN 000 0 09 06 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00000
WRLS NO
DN 4109 0 MARP
CPND
NAME Beardd Main Fax
XPLN 15
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 760
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFR WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTD
PLEV 02
PUID
FCAR YES
AACS NO
MLWU_LANG 0
DATE 15 NOV 2011
 
Set both their CLS to HTA and see what happens

Cheers!!
 
What is extension 760?

HUNT 760

If that is receptionist then either remove the HUNT number or point it somewhere else.
 
I am thinking that your problem is with the way that the RDR data is set.

As an alternate, why not try a hunt group with the 2 x faxs as members. You can set the hunt to "queue" calls so I would think problem solved. If both are advertised numbers then either an IDC or 2 groups would be needed.

As the pilot/s would need to be one (or both of the existing fax numbers) so by implication the DNs would change. You would also need to remove the diversions on each.
 
Another one and an oversight would be CLS 'FAXA'
If they don't solve then your RDR DATA could be HUNT or FNA but that's system/customer wide

A HUNT Group bank would be another option as DFKSydney suggests Mate!!

Cheers!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top