Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

incoming external calls

Status
Not open for further replies.

contactnow

Technical User
Oct 12, 2010
5
AL

Need help,
All incoming (external) traffic from public,
in one route has to go to switchboard operator number,
no matter if they dial extension,
all traffic to divert to operator.

System in use mxone-tsw.

Thank you
 
use command RODNI:ROU=XX,TRU=X-XX&&X-YY,DAY=XXXX,NIGH=ZZZZ;


but what type of trunk? caller id? If caller identity activated, use NUTRI to direct the calls to operator extension
 
Hi Monrovia

Route type is SL60.
Rodni does not help, it may be that something is missing.
The idea is that all incoming calls day and night should be directed to switchboard number!
(All incoming traffic has to go to switchboard number first)!

Thanks for help
 

then it's a ddi route? use NUTRI as advised?

best parnum
 
Hi

Try setting the call type with OPCTS, you might need to tweak CALT 5, 6 or 7 depending the the route configuration.

OPCTS:CORG=xx,CALT=5,ROU=rr;

Regards
Isinor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top