Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incoming calls

Status
Not open for further replies.
pook9924

pook9924

Technical User
Mar 1, 2018
5
US
Nortel meridian 1 opt81 c
How do you change the incoming calls to Digitone/winkstart? Not sure of the load and commands.
 
Sort by date Sort by votes
I'm guessing that you are referring to analogue trunks?. You need to print off your trunks in LD 20 but to make the changes in LD 14.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Do you know the commands that need to be used to change it? In LD 14 I have tried to make the changes but just gives me wrong command.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

phonetech2012
  • Locked
  • Question
no incoming calls to DID's that start with a "1" 1
2
Replies
20
Views
269
Michael OConnor
Michael OConnor
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
104
bltodd
bltodd
krtcomm1
  • Locked
  • Question
CLID on tandem calls outbound to PSTN when calls are forwarded externally
Replies
6
Views
184
krtcomm1
krtcomm1
notaphoneguy27
  • Locked
  • Question
CS1000 cannot make outbound calls
Replies
5
Views
213
Firebird Scrambler
Firebird Scrambler
AlaskanTech
  • Locked
  • Question
I can make out going calls but incomming calls just keep ringing.
Replies
2
Views
112
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top