incoming call

[hafid2016]

Hi please i add a TMCOW to hicom 300 (where there was only TMLRS) and i configure it but incoming call dont ring anywhere how can i rout it to atnd

 

[sbcsu]

ADD-COT:20,RCL&XFER&CHRT&CEOC&CEBC&CPS6&BSHT&CECO&ICZL&ICZO&CTLS&NTON;
ADD-COP:20,DTMF&RLSB&RLSA&NTON&DTM1,TA,TA;
CHANGE-TACSUEN=X-X-X-X,COTNO=20,COPNO=20,DEVTYPE=TC,DGTPR=*;

 

[hafid2016]

Hi;i add the cop; but the cot was not accepted;i have yet another one; but the probleme when i end the call TMCOW steel not detecting the cut intel 5 minutes;must i change somme parametrs in the ptime?

 

[sbcsu]

ADD-BCSUER,x,x,x,"Q2159-X160",0,0,,,,,,A,,0;
ADD-COT:22,RCL&XFER&CHRT&CEOC&CEBC&CPS6&BSHT&CECO&ICZL&ICZO&CTLS&NTON;
ADD-COP:22,DTMF&RLSB&RLSA&NTON&DTM1,TA,TA;
CHANGE-TACSUEN=X-X-X-X,COTNO=22,COPNO=22,DEVTYPE=TC,DGTPR=*;

Timers are relevant to your country/territory

If COT not accepted then add it one item at a time as it might be that some of the values are for newer HiPath.

See can you copy timers and cop/cot from a working system in your area ?

 

[hafid2016]

Please i steel have the probleme for this trunk i think is a ptime probleme or not?

H500: AMO TACSU STARTED
ANALOG TRUNKS (FORMAT=L)
PEN | 1- 1- 61- 0 | | | |
--------|--------------|--------------|--------------|--------------|
DEVTYPE | TC | | | |
DEV | BW | | | |
COTNO | 10 | | | |
COPNO | 10 | | | |
DPLN | 1 | | | |
ITR | 0 | | | |
TGRP | 1 | | | |
COFIDX | 0 | | | |
CCT | | | | |
DESTNO | 0 | | | |
INS | Y | | | |
COS | 1 | | | |
LCOSV | 1 | | | |
LCOSD | 1 | | | |
INIGHT | | | | |
NNO | | | | |
ALARMNO | 0 | | | |
CARRIER | 1 | | | |
ZONE | EMPTY | | | |
MFCVAR | 0 | | | |
DGTPR | | | | |
SUPPRESS| 0 | | | |
DGTCNT | 0 | | | |
TESTNO | 1 | | | |
CIRCIDX | 0 | | | |
CRDINT | 1 | | | |
CCTINFO | 0 | | | |
DIALTYPE| MOSIG-DTMF | | | |
DIALVAR | 0-0 | | | |
COEX | 0 | | | |
---------------------------------------------------------------------
<reg-cop
COPNO = ;
REG-COP:;
H500: AMO COP STARTED
ADD-COP:10,DTMF&RLSA&NO1A&DITW&TRAC&PDP1&DTM1,,,,;
ADD-COP:23,L3AR,TA,TA,,;

AMO-COP -3 CLASS OF PARAMETER FOR DEVICE HANDLER
REGENERATE COMPLETED;
<reg-cot;
REG-COT;
H500: AMO COT STARTED
ADD-COT:10,RCL&XFER&OVRA&KNOR&CEBC&COTN&BSHT&TRAI&DPRE&LWNC&NLCR&CECO&ICZL&NTON,,
;
ADD-COT:23,ANS&CEBC&CBBN&COTN&BSHT&LWNC&NLCR&DFNN&NLRD&NTON,,;

AMO-COT -3 CLASS OF TRUNK FOR CALL PROCESSING
REGENERATE COMPLETED;

reg-vfgkz;
TYPE = atndgr;
REG-VFGKZ:ATNDGR;
H500: AMO VFGKZ STARTED
H10: THERE EXIST A CONFIGURATION WHICH CAN NOT BE DISPLAYED / DELETED BECAUSE
OF CURRENT SETTINGS OF AMO-ZAND. TO DISPLAY / DELETE THIS CONFIGURATION,
THE PARAMETER ELNUM=100, ZWEIG/BRANCH RESERVE HAS TO BE CHANGED BY MEANS
OF AMO-ZAND. IT CONCERNS THE FUNCTION > 1000 COMPANY NAMES
ADD-VFGKZ:ATNDGR,0,,6,1;
ADD-VFGKZ:ATNDGR,9,,5,1;
ADD-VFGKZ:ATNDGR,9,,8,1;
ADD-VFGKZ:ATNDGR,9,,9,1;
ADD-VFGKZ:ATNDGR,9,,10,1;
ADD-VFGKZ:ATNDGR,9,,11,1;
ADD-VFGKZ:ATNDGR,9,,12,1;

<reg-wabe;
REG-WABE;
H500: AMO WABE STARTED
ADD-WABE:0,,6,ATNDDID,N,,,,,,,,;
ADD-WABE:10000&&49999,,,STN,N,,,,,,,,;
ADD-WABE:603&604,,,STN,N,,,,,,,,;
ADD-WABE:711,,,ATNDIND,N,,,,,,,,;
ADD-WABE:798,,,ATNDIND,N,,,,,,,,;
ADD-WABE:799,,,ATNDIND,N,,,,,,,,;
ADD-WABE:9,,,ATND,N,,,,,,,,;