Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

incoming analog line appreance on one of the phone button 2

Status
Not open for further replies.

thep1

IS-IT--Management
Oct 8, 2012
25
US
I would like to know how or if I can program a button for an incoming analog(pots) phone number line in to Avaya phone.
what I am trying to do is I have a one phone number (ex. 222-3333) connected to analog trunk port # (4) when someone calls that number I want it to light up in 5th button on the phone rather then the a=,b=,c= lines.

this is a different company line that client is trying to have it isolated so they know its not for them when it rings. Trying to accomplish this on IP500 v2, R9.1.
thanks in advance for any help.
 
Give the analog line a unique incoming group id
Create a new Collective Call Waiting hunt group for the company
Make an Incoming Call Route for the incoming group id, tag it as Acme Company
Put the extension(s) that will receive the incoming ring in the hunt group
Add a Group button on button 5 for the hunt group
If you happen to be using 14xx or 16xx phones, use Classic Ring Tone 2 for the group

Calls ring in, the phones rings, button 5 is blinking, the display says Acme Company, and perhaps the ring tone is unique
 
Another * for TTT,
For complete details on how to correctly use Line appearance keys see FAQ 940-7930


Do things on the cheap & it will cost you dear
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top