To All,
Could anyone explain how to program an 800# that comes in on a T-1 and uses a DINS number. I have a 0x32 w/ 4.1 with T-1 card and AT&T sends this # to our switch as DNIS 200.
At this time the only way to get the call is have 16 lines ring on each phone because the 800 call seems to come in on a different line each time you call. It starts at line 1 the first time and line 2 the second time and so forth until it gets to line 16 and then it goes back down.
Any help would be appreceated.
Thanks,
Danny
dcallega@nassau.cv.net
Could anyone explain how to program an 800# that comes in on a T-1 and uses a DINS number. I have a 0x32 w/ 4.1 with T-1 card and AT&T sends this # to our switch as DNIS 200.
At this time the only way to get the call is have 16 lines ring on each phone because the 800 call seems to come in on a different line each time you call. It starts at line 1 the first time and line 2 the second time and so forth until it gets to line 16 and then it goes back down.
Any help would be appreceated.
Thanks,
Danny
dcallega@nassau.cv.net