INADS Line

[config5623]

What TN board is used to connect the INADS line to? Is it the Maintenance board? Can anyone provide me with the TNXXX? I have to order the board but didn't know which one to order. I get a handshake then it drops.

Thanks

 

[AvayaTier3]

What tn boards are in your "A" carrier of cabinet 1?
If duplicated SPE, you will have same tn boards in the control side (left) "B" carrier of cabinet 1.

tn2404, tn790 are PROCESSOR boards for g3si (modems are built in)
for g3r tn1648 SYS ACCESS-MAINT (modem is built in)
for tn2402, tn798 (Prologics) uses external USRobotics modem.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[bpitt]

What he said. On the first two, it's a pair on the AUX field, which is connected to the board. On the Prologic, it's a serial modem connected to the octopus cable on the back of the processor.