iFOR Problem

[techserver]

Hello Everyone.

I have installed iFor in a computer with tow network device
and the service don't run.

OS: Windows 2000 Server

Thanks

 

[dusyi]

1. You must install NetBios.
2. iFOR LS needs to have the LANA number for NetBios set
to 0. There is a tool to change the LANA number available from Microsoft homepage, article Q220651.

 

[rfpui]

Hi Techserver

As Dusyi wrote You need tool (program) lanacfg.exe

If you have problem to find it I can send this program by e-mail.


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[fwaugh]

You will need to disable one of the NIC's as Ifor gets itself seriously confused on its binding in a 2 NIC system, there are other ways to get both working but if for any reason 1 fails IFOR gets very upset.

 

[techserver]

I disabled one of NIC's but iFor got a wrong target,
I try to disable one from the BIOS but still the system knows
both of them.
I tried another way witch worked; I configured both of the cards and iFor got the target from the MAC addres of the first NIC.