Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IDLE_DISP_STRING

Status
Not open for further replies.

MatthewMGR

IS-IT--Management
Feb 19, 2009
1
US
We've recently changed our IDLE_DISP_STRING from the default "NORTEL" to our company website. After making the change, MANY of our M2616 phones have updated to the new setting, however others haven't. We've realized that not all of our phones displayed the "NORTEL" banner to begin with. We've determined that our original cabinets work correctly and display our website, however some of our newer cabinets don't. Below I've posted our LD20/ISS printout. Any ideas?

>ld 22
PT2000

REQ iss

CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 3
ISSUE 00
IDLE_SET_DISPLAY
 
I bet someone else will have an idea, maybe better. But if it were me, I would probably just INI the switch.

You could try disabling and re-enabling the digital line cards in the cabinets that don't work, to see if that is a less volatile fix.

~~~
[small]GHTROUT.com | CS1000 Programming and Feature Guides | Tek-Tips FAQs | Recent Replies[/small]
 
Older M2xxx phones or newer phones with the older display units will not show the idle set display.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top