Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IDF to IDF Connection 1

Status
Not open for further replies.
Jul 29, 2009
13
US
Question on connecting IDF to IDF using fiber. To determine the amount of strands of fiber? Is multimode fiber the best way?
Thank you
 
Distance is the issue. If you are going over 290 meters, single mode is the safer media, for shorter distances multi mode is fine. And of course, if it is under 90 meters, Cat 6A is good.



I tried to remain child-like, all I acheived was childish.
 
If I'm going to use Multimode. How many strands Should I use IDF to IDF
Thank you
 
Number of strands really depends on your situation and future needs. You'll use two immediately. I'd probably go with six since this is a fairly standard cable configuration.
Mike
 
I would run at least 12-24 strands between closets, terminated in "LC" duplex panels. I would terminate all strands the first time though, as coming back and trying to terminate fiber after the system is in service is difficult at best.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top