Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identifying open analog stations on G3

Status
Not open for further replies.

Mindlessdrone

Technical User
Apr 28, 2010
19
US
I am still trying to get familiar with managing a G3 I just inherited through acquisition. I need to install two analog conference phones. I dont know how to identify open analog stations and then setup users for them. Can anyone post the commands I will need quick, thanks!
 
list configuration stations

Anything with a 'p' or 't' is available...

Code:
03A05    ANALOG LINE              TN793   000006     p  p  p  04 05 06 p  08
                                                     09 p  11 12 13 14 15 16
                                                     17 18 19 20 21 22 23 24


Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.
 
'list stations' will list stations
'list configuration stations' will list the physical hardware ports associated with station programming. 'p', 't' or 'u' indicate ports that do not have an extension assigned. The ports that have a number have an extension assigned to the physical port.
 
p=psa - Personal Station Access
t=tty -
vertually the same. tti uses a system wide password and psa uses the individual station security code as the password
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top