Identifying open analog stations on G3

[Mindlessdrone]

I am still trying to get familiar with managing a G3 I just inherited through acquisition. I need to install two analog conference phones. I dont know how to identify open analog stations and then setup users for them. Can anyone post the commands I will need quick, thanks!

 

[98Converter]

list configuration stations

Anything with a 'p' or 't' is available...

03A05    ANALOG LINE              TN793   000006     p  p  p  04 05 06 p  08
                                                     09 p  11 12 13 14 15 16
                                                     17 18 19 20 21 22 23 24

Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[Mindlessdrone]

so do I just list all stations?

 

[Textron68]

'list stations' will list stations
'list configuration stations' will list the physical hardware ports associated with station programming. 'p', 't' or 'u' indicate ports that do not have an extension assigned. The ports that have a number have an extension assigned to the physical port.

 

[Mindlessdrone]

sorry I missed what you had in bold

 

[leftyx]

is there any difference between a 'p' or 't'?

 

[Textron68]

p=psa - Personal Station Access
t=tty -
vertually the same. tti uses a system wide password and psa uses the individual station security code as the password