Identifying Card Type

[StopGo]

Hello,
In LD 20, when you do an IDC, based on the ouput, how do you tell the card type? For example,
NT8C02GB, the 02 indicate that it is a digital line card.
What digits tell you if it is an PRI, ITG or Analog card?
Thanks.

 

[GHTROUT]

First, the system does not use LD20 to perform IDU/IDC, etc. You may have entered LD20, but the system changes to LD32 for your convenience.

If you use the NTPs, you would never find a explaination of IDU or IDC in the "LD20" chapter, you would find it in the LD32 chapter.

For your question, it sounds like you need to know where the equipment identification numbers are in the manuals... there is the trick...the NTPs/MERL/SERL each have "search" capability....but to save you time, here is the manual you need...it will not be available for more than a week or so.

http://www.ghtrout.com/pub/

~

http://www.GHTROUT.com/

 

[StopGo]

Thanks a bunch.