idc/sdid option 11

[Arlosym]

hi please could someone let me know why when i have created a new idc group does the ddi/did not hit the extension but goes through to reception ? could anyone please advise if there is somewhere else i can look except ld 49

much appreciated

 

[1norteltech]

Do you have IDC = yes on the incoming route and is your IDC tree number correct for DCNO and NDNO? You can print the route in LD 21.

 

[Arlosym]

CUST 00
NFCR YES
MAXT 20
OCB1 255
OCB2 255
OCB3 255
IDCA YES
DCMX 20

this is what i get in 21 , am i looking at fcr_tree or not

 

[phonz1]

no, ld 21 do a PRT, type RDB for you incoming routes and post

 

[Arlosym]

TYPE RDB
CUST 00
DMOD
ROUT 100
DES 691122
TKTP IDA
SIGL DAS
PRIV NO
RCLS EXT
DTRK NO
DSEL VOD
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1600
TARG
BILN NO
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
LID 0
TIMR EOD 13952
RMA 20480
SRM 32640
RAS 13952
DRNG YES
CDR YES
INC YES
LAST YES
TTA NO
OAL YES
AIA YES
OAN YES
OPA YES
OPD YES
NDP EXC 0
CDRX NO
CCO YES
NATL YES
CFWR NO
IDOP NO
MUS NO
MR NO
PANS YES
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4


PAGE 035

FRL 5 5
FRL 6 6
FRL 7 7
DTOS NO
TTBL 0
ALRM NO

on rout 100 as you can see is a different number which does not have a idc table but has ddi going to ext, rout 110 on a different number i have created idc 1 converting the dgt's

so should i chg rout 110 to say idc=yes

 

[tnphoneman]

IDC on the route should be set to yes on the incoming trunk route and then DCNO and NDNO need to be set to the IDC table you created like 1norteltech said on the first post.

 

[phonz1]

yep, like tnphoneman says, try that and let us know!

 

[Arlosym]

cheers for that i shall try