All of the ICS software versions will support CLID. I do not know what you mean by “automatic.” No matter what software you have, you still need CLID cards in the ICS (hardware,) and you will need to subscribe to the CLID service from your dial-tone provider.
There is a way to have the caller ID from an outside line show up in the LCD display without pushing a feature ie:
811. I think I am talking about automatic call display.
I do have the correct trunk card. All I see now when an incoming call comes in is the time and date. I think I have set it up correct to display the info but??
I should see something even if it is call on line 001
or something??
Check the programing under Sets in telco features and set up call display there. There are some options that have to be set up for the set to display and for log sizes. The line has to ring on the set also.
Mystery solved.
SBC said they have activated the Caller ID function on my line when in fact they had not. All is well and it works fine. Don't trust what the Telco tells you..
jk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.