ICP/PBX Networking > IP networking > Network IP adress

[Tech guy 297]

Hi guys, i have a problem in MiVb 10.1 the option Network IP adress doesn't come so i can't fil the ip adress of the ip trunking. ICP/PBX Networking > IP networking > Network IP adress. What other solutions are? i dont see the option network ip adress. i see it on MiVb 8.0

 

[jpruder]

This is know by MSL, only need to be yes for local

 

[Tech guy 297]

but how does MSL know, we've had 2 hardware pbx that was communication on ip trunk but right know we are going to migrate one pbx to virtual to 10.1 and that ip/trunk network adress option has gone

 

[MarvinJK]

https://<IP

controller address>/server-manager

 

[Billz66]

all mivbs are added to network elements with their name and Ip address
they should all have a pabx number
on later software
its no longer required to set the ip address against the entries in ip/xnet / ICP/PBX networking
the xnet just uses the pbx number and gets the ip from network elements

If I never did anything I'd never done before , I'd never do anything.....