I have an IBM server that has a broadcom netextreme network card. It is causing a port security violation.
Jan 30 01:43:31: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0014.5e18.f690 on port GigabitEthernet1/0/19. (Bedford2-1)
I have done an ipconfig /all but this MAC address does not show up. I have multiple IBM servers and have port security set to:
interface GigabitEthernet1/0/19
switchport mode access
switchport port-security
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
macro description cisco-desktop
spanning-tree portfast
spanning-tree bpduguard enable
!
For some reason this one file server keeps causing a violation. I am out of ideas.
Jan 30 01:43:31: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0014.5e18.f690 on port GigabitEthernet1/0/19. (Bedford2-1)
I have done an ipconfig /all but this MAC address does not show up. I have multiple IBM servers and have port security set to:
interface GigabitEthernet1/0/19
switchport mode access
switchport port-security
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
macro description cisco-desktop
spanning-tree portfast
spanning-tree bpduguard enable
!
For some reason this one file server keeps causing a violation. I am out of ideas.