I have an IBM PC Server 330 8640-PM0 wich is killing me.
When it starts it reaches the ServeRaid ver. 2.80.04 screen (where you can press <ctrl+I> for configuration although i dont).
It reports that:
1. firmware is ver. 2.82.00.
1. the drive configuration test fails.
2. warning: 2 logical drives are offline.
3. 2 logical drives are installed. (what are logical drives)
No disks are available after this. And no SCSI devices are visible in the Adaptec configuration tool ver. 1.26S1 except from device 7 which is the adapter.
The IBM has a bay with room for 6 disks. I have one disk for simplicity.
It does recocnize the SCSI cd-rom. It is useable although its not in the list over SCSI devices, mensioned earlier.
Any help is very much appreciated
Troels Anzie
When it starts it reaches the ServeRaid ver. 2.80.04 screen (where you can press <ctrl+I> for configuration although i dont).
It reports that:
1. firmware is ver. 2.82.00.
1. the drive configuration test fails.
2. warning: 2 logical drives are offline.
3. 2 logical drives are installed. (what are logical drives)
No disks are available after this. And no SCSI devices are visible in the Adaptec configuration tool ver. 1.26S1 except from device 7 which is the adapter.
The IBM has a bay with room for 6 disks. I have one disk for simplicity.
It does recocnize the SCSI cd-rom. It is useable although its not in the list over SCSI devices, mensioned earlier.
Any help is very much appreciated
Troels Anzie