Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IBM PC Server 330

Status
Not open for further replies.

kissmine

Programmer
Aug 10, 2003
1
AU
I have been given a Dual pii-266 with 27gig hdds (6 x 4.5gig rack). I am having a lot of problems with installing a OS onto it!

I am not sure on what the Hdd rack is ment to plug into? There is 3 cables. 2x scsi and 1x little pin. It has a scsi CDrom too. If anyone can point me to a site or more infomation on how i can get this going. It would be great :)

Thanx Kissmine
Adam Gardner
 
Your machine is a PC Server 330, but has also a Type-Model

Find them and go at :


Click Personal Computer, and continue.
Sorry in this moment the site is off line, and I cannot be more precise.


bye
 
i have ibm pc server 330 (8640-PM0)

how i can disable built in VGA in there which is S3trio64v+

because when i try put any other 4mb or 8mb pci vga card in there and run windows 2000 i got some error on blue screen what i do now?

i really need to install 4mb vga on it for fast graphics so please help me in this problem...

malovaski
 
Hi there,

Take a look here:


This should take you to the page for a PC Server 330

If you check in the OS installation section, you might find some guidance.

If your machine is not a 8640-PM0, then you can go to the site that victory listed and type your machine type and model type in and it should take you to a similar site.

One manaual that should be available is the Hardware Maintenance Manual. This is the book that tells you what all of the parts that are on your server is/are/does. This should be in the downloadable publications section under HMM.

Best of luck,
kosekjm
 
DEAR TEK-TIPS MEMBERS/USERS/EXPERTS,

I HAVE IBM PC SERVER 330 MODEL: (8640-PM0) WITH LATEST BIOS 28A .... I INSTALLED WINDOWS 2000 SERVER ON IT WITH BOOTABLE CD. IT HAS BUILT IN S3 TRIO64V+ CARD WHICH IS WORKING PROPERLY BUT WHEN I INSTALL ANOTHER 4MB ATI 3D RAGE IIC CARD OR TRIDENT 4MB CARD IN PCI EXPENSON SLOT 1 OR 2 THEN I GOT VGA CONFLICT ERROR IN DEVICE MANAGER. AND IT'S SHOWING YELLOW TAGS ON BOTH CARDS. AND IN VGA PROPERTIES/SETTINGS I GOT ONLY 16 COLORS DISPLAY :(

WHEN I CLICK ON ATI RAGE IIC CARD IN DEVICE MANAGER I SEE THIS ERROR.

Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)
Click Troubleshooter to start the troubleshooter for this device.

AND WHEN I CLICK ON S3TRIO64V+ IN DEVICE MANAGER I SEE THIS ERROR.
This device cannot start. (Code 10)
Click Troubleshooter to start the troubleshooter for this device.

I ALSO TRY DISABLE S3TRIO CARD BUT I STILL GOT SAME VGA CONFLICT :(...


I REALLY WANT TO INSTALL 4MB OR 8MB 3D PCI CARD IN MY IBM SERVER FOR GAMES.

I ALSO READ THIS IN IBM PC SERVER 330 HARDWARE MAINTANCE MANUAL THAT WHEN U INSTALL ANY OTHER VGA CARD IN IBM SERVER THEN BUILT IN VGA WILL BE AUTOMATICALLY DISABLED. BUT I DON'T WHY THIS CONFLICT NOT RESOLVING... AND I ALSO INSTALLED LATEST BIOS FROM IBM SITE WHICH IS 28A.

PLEASE HELP ME !!!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top