i2050v3 after upgrade to BCM400 / 4.0

[someuser23]

Hi everyone,

So a few months ago we upgraded our BCM 400 from 3.7 to 4.0.
As we already one license for an IP set, I thought that I could use the new V3 of i2050. Well a month has passed and now we need a license server it seems

The question is, as we had one V2 License, What do we need to do to keep this license going?

Also, can anyone recommend a good reseller in Canada (Montreal)?

Cheers and thanks!

 

[DigitelD]

Version 3 is only supported on the CS1000. I installed it and it only worked for a few months. That was the trial period.

SHK Certified (School of Hard Knocks)
NCSS

 

[someuser23]

Thanks for the heads up DigitelD.

hmmm.. I guess upgrading to a CS1000 is out of the question =p

 

[Deweyhumbolt]

Is version 3, that much better than version 2? If so, what are the differences?

Adversity is Opportunity

 

[Firebird Scrambler]

Stick with Version 2 & make sure that you have the upgrade done. I had the same problem & I was on a CS1000. I just uninstalled it & went back to V2.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.

 

[someuser23]

The issue I was having with V2 is that it does not work over our VPN (Juniper SSL VPN)

 

[telcodog]

Reputable vendor in Montreal.......MTSAllstream.

 

[mof123]

i need link to download nortel 2050.V3 softphone and if there is any soft phone work with BCM200