Good Morning. Looking for some Signaling Server troubleshooting techniques, maintenance commands, or logs to look at to help me identify an issue.
Site A = Main Office with CS1000m, leader and follower Sig Servers on 7.65.
Site B = Remote office with 29 I2004p2 phones registered and load balanced. Built as Call Center acquired by AACC.
Site C = Remote Office with 1 I2004p2 phone registered
Site D = Remote Office with 1 I2004p2 phone registered
We're getting complaints of all phones dropping registration and reregistering. However when I look at the uptimes of the phones, the phone at Site D never drops.
The phone at Site C does drop with the phones at Site B. Sometimes when they notify us of the issue, the uptimes of the phones will be mismatched like it only happened to half the phones, not all. This occurs across both Sig Servers and is not isolated to just one of them.
I see no errors in the PBX and the Node stats show consistent uptimes for the node.
Any thoughts or ideas to help me identify the source of the problem?
Site A = Main Office with CS1000m, leader and follower Sig Servers on 7.65.
Site B = Remote office with 29 I2004p2 phones registered and load balanced. Built as Call Center acquired by AACC.
Site C = Remote Office with 1 I2004p2 phone registered
Site D = Remote Office with 1 I2004p2 phone registered
We're getting complaints of all phones dropping registration and reregistering. However when I look at the uptimes of the phones, the phone at Site D never drops.
The phone at Site C does drop with the phones at Site B. Sometimes when they notify us of the issue, the uptimes of the phones will be mismatched like it only happened to half the phones, not all. This occurs across both Sig Servers and is not isolated to just one of them.
I see no errors in the PBX and the Node stats show consistent uptimes for the node.
Any thoughts or ideas to help me identify the source of the problem?