i2004 VoIP - Securing the set config? 3

[81Cadmin]

Is it possible to secure the configuration of IP phones to restrict users from changing TN's? I recall some documentation about securing IP phones and using install passwords with timeouts, however I can't seem to find any NTP on this.

System:
- 81C Succession Rel 3.0
- Signalling servers (sse-2.11.14)

 

[gwebster]

IP Line NTP - IP Phone Installer Passwords

 

[81Cadmin]

I wasn't able to find the information in the NTP recommended. Most spoke more about entering the installer password at the set level. Do you have a specific NTP number?

I did figure out however how to enable installer passwords. The most important question is "Do you know what happens to registered sets once nodePwdEnable is run and a password is set?"

We have approximately 150 IP users (50 Call Center Agents) and I want to avoid unforeseen issues.

Please let me know on what the result of this change might be.

Cheers.

 

[crac74]

No change for registered users. However I'm using rls 4.5 so I don't know for rls 3.0
nodePwdSet for entering the password.
nodePwdEnable to activate it.
If you install or reboot a phoneset you'll be prompted to enter teh node password to enter the TN config.
Very simple.

 

[81Cadmin]

if the password is enforced on all reboots how does the configuration account for i2050 users would typically reboot their phones daily (or multiple times per day)?

 

[81Cadmin]

Thanks, I just implemented the password, and temp password in order to test. It works great and I now understand the password prompt if a phone is rebooting. It doesn't stop it from loading the configured TN, just prevents users from entering a new TN.

Thanks to all for you help.