i2004 Phone Set Node 1

[enderwiggins]

I have an option 11 and am trying to program a new i2004 set onto the switch. We have enough liscences to cover us but in the set programing, as a final step - it asks for a node number and tn address. I have the TN but am having diffuculty identifying what the node number could be. Can some please advise on how the node can be identified?

 

[yyrkroon]

you can access EM and check the Node Properties or from the CLI, go to LD 117 and STAT SERV

 

[enderwiggins]

Thank you yyrkroon. Your answer was most helpful and took me right to where I needed to go to get the result I was pulling what is left of my hair out for - which is getting the ever so elusive dial tone.

Thanks again

James Siedlecki

 

[LeeMcCauslin]

For some reason I feel I should create a username of Michael Valentine or maybe Lazarus Long just to post in this thread. ;-)

=======================================
"Dyin'? Boy, He can have this little life any time He wants to. Do Ya hear that? Are ya hearin' it? Come on. You're welcome to it, Ol' Timer. Let me know You're up there. Come on. Love me, hate me, kill me, anything. Just let me know it... I'm just standin' in the rain talkin' to myself." Cool Hand Luke

 

[LeeMcCauslin]

Doh - or more correctly, Valentine Micahel Smith.

Or maybe just Podkayne to keep it simple.

=======================================
"Dyin'? Boy, He can have this little life any time He wants to. Do Ya hear that? Are ya hearin' it? Come on. You're welcome to it, Ol' Timer. Let me know You're up there. Come on. Love me, hate me, kill me, anything. Just let me know it... I'm just standin' in the rain talkin' to myself." Cool Hand Luke

 

[yyrkroon]