I want to install winxp on my Nicelogg 1

[Vilse]

Hello!

I have a nicelogg running on NT4 with "Logger installation package version 8.5".
Now i want to install winxp.

I have tried to install xp but when i run nice supervision i got the error message "DBM Initialization error 697"
When i look at the error codes in the manual it says that i have to contact nice costumer support.

Before i do that i will try here if someone know if it is possible to run "Logger installation package version 8.5".
on winxp, or do i have to insatll i later version of nicelog?

/Vilse

 

[nice12345]

windows xp not supported on 8.5.see here

https://www.extranice.com/EIS/Custo...arty Technical Guidelines - All Platforms.pdf

windows XP supported from 8.9 and up

 

[nice12345]

the only logger version ever that was deployed on windows xp was NCFIII and this is version 9.x

 

[Vilse]

Okej that was bad.
But is it possible to install Nice Perform Logger 9.06.03.24 SP3?

What i want to do is to install a fresh copy of winxp to my Nicelogg that had NT4 with Nicelogg 8.5 before.

Or do i have to install version 8.9 and then upgrade to 9.06.03.24?

/DN

 

[nice12345]

have a look here page 11

https://www.extranice.com/EIS/Produ...NICE Version 8.9 Upgrade Policy (Rev. A2).PDF

as 8.9 and 8.5 are sunset you will most likely have to do a forklift as there is no software migration from 8.5 to 8.9 for logger. also here you will find upgrade paths to latest NICE release

https://www.extranice.com/EIS/Produ...ement Release 41/Upgrade Policy - NIM 4.1.pdf

 

[TheATeam]

If your logger is running NT4 then I would suspect the hardware is not capable of running XP anyway let alone putting some Nicelog software on top?

 

[Vilse]

What do you mean by "..anyway putting some some Nicelog software on top"?

 

[TheATeam]

What I meant was that if the hardware is old (very likely as the current o/s is NT4 and the logger is 8.5) then it may not be capable of running more recent Nicelog versions as well as probably not capable of running XP

 

[Vilse]

Aha okej i understand.
Thanks for helping.