I need to know which volumes savesets were cloned to

[younixgeek]

My Clarion CDL is full! I know for a fact not all of the savesets have been cloned sucessfully because operations has had to stop them often due to problems. I am going through each volume on the CDL and using mminfo to list the ssid,name,etc,etc. However I cannot get it to tell me which volume the clone was written to so I can go and do a clflags on that volume. Once I have this report I can clone the savesets that failed and clean of the CDL space. Please help?

Networker 7.1.2
Solaris 8
Clarion 700 CDL
Quantum P4000 JB
SDLT320's

 

[605]

Just use mminfo as follows:

mminfo -q "copies=2,pool='clone_pool'" -r "ssid,volume"

This will tell you the volumes where the save sets have been cloned to.

 

[younixgeek]

Thanks 605,

This command displays about 70 entries for each save set. How do I make the connection back to the original CDL tape so i know its safe to purge? Using the ssid?

-yg


Partial Output:
INFORMIX:/on_hjprod 1110589215 PGD966D
INFORMIX:/on_hjprod 137510744 PGD966D
INFORMIX:/on_hjprod 3392290756 PGD966D
INFORMIX:/on_hjprod 3291627475 PGD966D
INFORMIX:/on_hjprod 3207741409 PGD966D
INFORMIX:/on_hjprod 2654093483 PGD966D
INFORMIX:/on_hjprod 2620539057 PGD966D
INFORMIX:/on_hjprod 2603761847 PGD966D
INFORMIX:/on_hjprod 2050114021 PGD966D
INFORMIX:/on_hjprod 1882341945 PGD966D
INFORMIX:/on_hjprod 1865564738 PGD966D
INFORMIX:/on_hjprod 1848787527 PGD966D
INFORMIX:/on_hjprod 1798455909 PGD966D
INFORMIX:/on_hjprod 1781678702 PGD966D
INFORMIX:/on_hjprod 1764901486 PGD966D
INFORMIX:/on_hjprod 1731347059 PGD966D
INFORMIX:/on_hjprod 1714569844 PGD966D
INFORMIX:/on_hjprod 1496466144 PGD966D
INFORMIX:/on_hjprod 1412580084 PGD966D
INFORMIX:/on_hjprod 1362248438 PGD966D
INFORMIX:/on_hjprod 858932117 PGD966D
INFORMIX:/on_hjprod 842154908 PGD966D
INFORMIX:/on_hjprod 825377702 PGD966D
INFORMIX:/on_hjprod 741491731 PGD966D
INFORMIX:/on_hjprod 607274039 PGD966D
INFORMIX:/on_hjprod 473056363 PGD966D
INFORMIX:/on_hjprod 4214375693 PGD966D
INFORMIX:/on_hjprod 4164044050 PGD966D
INFORMIX:/on_hjprod 4130489623 PGD966D
INFORMIX:/on_hjprod 3912385911 PGD966D
INFORMIX:/on_hjprod 3761390996 PGD966D
INFORMIX:/on_hjprod 3694282161 PGD966D
INFORMIX:/on_hjprod 3677504948 PGD966D
INFORMIX:/on_hjprod 3660727739 PGD966D
INFORMIX:/on_hjprod 3627173307 PGD966D
INFORMIX:/on_hjprod 3543287236 PGD966D
INFORMIX:/on_hjprod 3425846775 PGD966D
INFORMIX:/on_hjprod 3409069564 PGD966D
INFORMIX:/on_hjprod 3241297481 PGD966D
INFORMIX:/on_hjprod 3157411441 PGD966D
INFORMIX:/on_hjprod 2704426843 PGD966D
INFORMIX:/on_hjprod 2687649633 PGD966D
INFORMIX:/on_hjprod 2654095206 PGD966D
INFORMIX:/on_hjprod 2469545954 PGD966D
INFORMIX:/on_hjprod 2268219506 PGD966D
INFORMIX:/on_hjprod 2234665079 PGD966D
INFORMIX:/on_hjprod 2217887869 PGD966D
INFORMIX:/on_hjprod 2150779107 PGD966D
INFORMIX:/on_hjprod 2117224677 PGD966D
INFORMIX:/on_hjprod 2100447464 PGD966D
INFORMIX:/on_hjprod 1932675362 PGD966D
INFORMIX:/on_hjprod 1848789332 PGD966D
INFORMIX:/on_hjprod 1748126185 PGD966D
INFORMIX:/on_hjprod 1731348976 PGD966D
INFORMIX:/on_hjprod 1714571764 PGD966D
INFORMIX:/on_hjprod 1530022551 PGD966D
INFORMIX:/on_hjprod 1513245355 PGD966D
INFORMIX:/on_hjprod 1395804880 PGD966D
INFORMIX:/on_hjprod 1379027669 PGD966D
INFORMIX:/on_hjprod 1043483575 PGD966D
.
.
.

 

[605]

What do you mean? - There is just one entry per save set.
If you mean the save set name, yes this is true as you can see. Of course you must combine these parameters with others (for instance the savetime) to achieve whatever you want to mminfo to report.

If you want to see all save sets that have not been cloned, you go for "copies=1".