I need HEX address for debug on a MICS 5.0

[MARCELJR38]

Hie guys and girls

I need HEX address for debug on a MICS 5.0
I am not sure if it is a XC version?
Is it the same HEX ?

Thanks

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[NTL555]

to reset the password right? well if this is what you are trying to accomplish, purchase a remote access device, use the browser tool, and change the installers password.

Nam555

 

[MARCELJR38]

their must be a HEX code
example C01CEA

thanks in advance

M.

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[telemarv]

We are compiling a list of debug address and no one has reported back that of 5.0.
You'll have hunt around for it. Its in the area of C01CC6 which is the address for a 4.1. If you know the admin password the config password is directly before. Please report back your findings to thread 799-943373

 

[exsmogger]

This is what I have on my list for MICS R5.0:

C01CEA

Give that a try and see if it's correct.

Brian Cox

http://www.jandjcommunications.com

 

[MARCELJR38]

ok I will keep you posted.. thanks

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[MARCELJR38]

Thanks EXSMOGGER

Thats the right one

a+



marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[bkrike]

OMG- it was the same as your example!

their must be a HEX code
example C01CEA

C01CEA

 

[exsmogger]

Ahh, synchronicity!

Brian Cox

http://www.jandjcommunications.com