Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need HEX address for debug on a MICS 5.0

Status
Not open for further replies.

MARCELJR38

Vendor
Nov 5, 2002
38
CA
Hie guys and girls

I need HEX address for debug on a MICS 5.0
I am not sure if it is a XC version?
Is it the same HEX ?

Thanks

marcel.richardjr@cnatelecom.com
 
to reset the password right? well if this is what you are trying to accomplish, purchase a remote access device, use the browser tool, and change the installers password.

Nam555
 
We are compiling a list of debug address and no one has reported back that of 5.0.
You'll have hunt around for it. Its in the area of C01CC6 which is the address for a 4.1. If you know the admin password the config password is directly before. Please report back your findings to thread 799-943373
 
OMG- it was the same as your example!

their must be a HEX code
example C01CEA


C01CEA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top