Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

i need busy tone when phone is busy!

Status
Not open for further replies.

AC427

Technical User
Mar 12, 2007
70
GB
Hi,

Im sure this is a simple issue and its staring me in the face. I need a 3902 to give busy tone when its busy. At the moment all it gives is the continuous dead tone when the phone is in use.

I have tried the phone with no forwarding of any sort, just FDN set to forward to itself and all forwarding set to forward to itself, but none of these configs seem to give busy tone.

Can any one help please.

Regards
 
FDN is for 'no answer', hunt is for busy. Get rid of hunt...
 
Hi,

Thanks for the advise, but neither worked. I was initially thinking it was just with this set, but its the same on others, so im now thinking its a system wide issue.

is the busy tone set in the trunk anywhere perhaps?

 
someone has advised me it might be a setting called Treatment somewhere in ld 15 CDB.

Any ideas if this is an option and if so where?
 
Look at the simple solution first - Maybe set/s are forwarded incorrectly ie in a loop ?

Have a look at their profiles first to determine

Cheers!!
 
There is no loops etc as the only place it has been forwarded to is itself or no forwarding at all.

After further testing i have found it gives busy tone on internal calls and from an IP incomming call, so it looks like it might be a trunk setting.

 
This is the trunk that i dont get busy tone from
YPE RDB
CUST 00
DMOD
ROUT 110
DES EURO ISDN
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC EURO
CNTY UK
SBN NO
PNI 00000
NCNA NO
NCRD NO
ISAR NO
CPFXS YES
DAPC YES
TBL 0
INTC NO
DSEL VOD
PTYP DCO
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 1610
TCPP NO
TARG 01
BILN NO
OABS
INST
IDC YES
DCNO 1
NDNO 1 *
DEXT NO
DNAM NO
MFC NO
ICIS YES
OGIS YES
TIMR ICF 256
OGF 512
EOD 13952
LCT 256
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GTO 896
GTI 0
SFB 3
NBS 2048
NBL 4096


PAGE 002

IENB 5
TFD 0
VSS 0
VGD 6
DTD NO
SCDT NO
2 DT NO
DDO NO
DRNG YES
NDRI 00
CDR YES
INC YES
LAST YES
QREC NO
OAL YES
AIA YES
OAN YES
OPA YES
OPD NO
NDP EXC 0
CDRX NO
CCO NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS NO
MR NO
PANS YES
EQAR NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
OHQT 00
TTBL 0
PLEV 0
OPR NO
PRDL YES
EOS NO
DNSZ 0
RCAL NO
MCTS NO
ALRM NO
BTT 30
ACKW NO
ART 0
PECL NO
DCTI 0
TIDY 1610 110
SGRP 0
AACR NO

TYPE RDB
CUST 00
DMOD


and this is the trunk that i do get busy tone from

TYPE RDB
CUST 00
DMOD
ROUT 121
DES ITG_TRUNK
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
RCLS EXT


PAGE 004

DTRK NO
ISDN YES
MODE ISLD
DCH 13
IFC SL1
PNI 00001
NCNA YES
NCRD YES
TRO NO
FALT NO
CTYP CDP
INAC NO
ISAR NO
DAPC NO
PTYP ATT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1621
TCPP NO
TARG
BILN NO
OABS
INST
IDC NO
DCNO 2 *
NDNO 2
DEXT NO
SIGO STD
STYP SDAT
MFC NO
ICIS YES
OGIS YES
TIMR ICF 1920
OGF 1920
EOD 13952
LCT 256
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GTO 2048
GTI 2048
SFB 3
PRPS 800
NBS 2048
NBL 4096
IENB 5
TFD 0
VSS 0
VGD 6
EESD 1024
SST 5 0
DTD NO
SCDT NO
2 DT NO
NEDC ETH


PAGE 005

FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG YES
NDRI 00
CDR YES
INC YES
LAST YES
QREC NO
OAL YES
AIA YES
OAN YES
OPD YES
NDP EXC 0
CDRX NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS NO
PANS YES
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
OHTD NO
PLEV 2
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 1621 121
ATRR NO
TRRL NO
SGRP 0
AACR NO

Anyone know what setting might be making the difference here?
 
First we were asking about making a 3902 phone return a busy signal when it was in-use, and now we are posting trunk routes (but not trunk TNs). I'm not sure what changed.

You also said it gives "continuous dead tone". Can you desciribe what "dead tone" is?

PS: Does this phone have CLS FBA? If it does, set CLS FBD

--
Nortel Resources at GHTROUT.com
--
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top