I JUST GOT A SYSTEM! NOW WHAT?

[norstarboston]

Hi all,
I just aquired a compete system (NAM,KSU, Trunk module etc)but I am guessing I am missing some wiring parts such as wiring blocks etc. I currently manage a system in my office so I think I can make it function but my concern is over the wiring.

Is there some standard pre-connectorized blocks and cables I can purchase that plug directly into the system (both for my incoming analog lines and my station ports) If anyone knows any vendors I can buy online from it would be appreciated. Thanks much!!!

 

[ty0004]

siemons has prewired 66 blocks you can purchase, and with pre made amphenol cables it should make the install very easy.

 

[MarvO1]

Or you could try something like this:

http://www.locojoe.com/marv-o

MarvO said it

 

[norstarboston]

Ok...so if I buy a pre-connectorized block and a pre-connectorized cable I can just plug the block into the system and the wiring will match the pinout chart listed in the FAQ?

 

[MarvO1]

That's true.

MarvO said it

 

[ty0004]

yes, the prewired blocks make it much easier, and faster to get on with your instal. MarvO...nice work on the prewired boards.