I installed a dvd drive and a soundblasterlive 5.1. When i turn the computer back on i heard a humming noise. i opened the case and observed my fan sticking. the computer booting completely up before i opened the case and screwed it up. I cleaned the fan but it did not stop the noise. SO i got the bright ideal and place an old fan on the processor and it starting spinning but the computer stopped at the dos prompt. i tried to reboot but no reboot. the fan came of a amd 500 chip.
i have a 1.2 gig duron
300+ memory
ati video card all-in-one 32mb
80 gig harddrive
xp-professional
via motherboard
300 watt powr supply
when i try to boot, the power supply is blowing,the drive light up, but i have no video, i tried a different monitor, and a different video card.(same result)
there are no beep coming from the motherboard.
I installed a dvd drive and a soundblasterlive 5.1. When i turn the computer back on i heard a humming noise. i opened the case and observed my fan sticking. the computer booting completely up before i opened the case and screwed it up. I cleaned the fan but it did not stop the noise. SO i got the bright ideal and place an old fan on the processor and it starting spinning but the computer stopped at the dos prompt. i tried to reboot but no reboot. the fan came of a amd 500 chip.
i have a 1.2 gig duron
300+ memory
ati video card all-in-one 32mb
80 gig harddrive
xp-professional
via motherboard
300 watt powr supply
when i try to boot, the power supply is blowing,the drive light up, but i have no video, i tried a different monitor, and a different video card.(same result)
there are no beep coming from the motherboard.
UPDATE:
i installed a new cpu (ax2000dmt3c) on the old motherboard
and it is reading it as 1250 i thoght it was suppose to
read it as a 2000. the motherboard is a ms-6378 from micro
do i need to change anything on the motherboard. i purchased the chip from fry's. it came with a motherboard seperate, but i installed the cpu on the old motherboard. the two cost 125.00 with a fan.
NOTE: THE CHIP WAS ADVERTISED AS A XP 2000 +
thank you
biggray41
thank you
biggray41
i have a 1.2 gig duron
300+ memory
ati video card all-in-one 32mb
80 gig harddrive
xp-professional
via motherboard
300 watt powr supply
when i try to boot, the power supply is blowing,the drive light up, but i have no video, i tried a different monitor, and a different video card.(same result)
there are no beep coming from the motherboard.
I installed a dvd drive and a soundblasterlive 5.1. When i turn the computer back on i heard a humming noise. i opened the case and observed my fan sticking. the computer booting completely up before i opened the case and screwed it up. I cleaned the fan but it did not stop the noise. SO i got the bright ideal and place an old fan on the processor and it starting spinning but the computer stopped at the dos prompt. i tried to reboot but no reboot. the fan came of a amd 500 chip.
i have a 1.2 gig duron
300+ memory
ati video card all-in-one 32mb
80 gig harddrive
xp-professional
via motherboard
300 watt powr supply
when i try to boot, the power supply is blowing,the drive light up, but i have no video, i tried a different monitor, and a different video card.(same result)
there are no beep coming from the motherboard.
UPDATE:
i installed a new cpu (ax2000dmt3c) on the old motherboard
and it is reading it as 1250 i thoght it was suppose to
read it as a 2000. the motherboard is a ms-6378 from micro
do i need to change anything on the motherboard. i purchased the chip from fry's. it came with a motherboard seperate, but i installed the cpu on the old motherboard. the two cost 125.00 with a fan.
NOTE: THE CHIP WAS ADVERTISED AS A XP 2000 +
thank you
biggray41
thank you
biggray41