I have an IP500 with PRI and Xima V 2

[shermosillo]

I have an IP500 with PRI and Xima VRTX device for recording. The customer wants a prompt to play that the call is being recorded. Since this is being recorded via the VRTX device, I can't use the VM Pro prompt that plays by default when recording is enabled thru VM Pro. The only thing I can think of and have started doing, is to create a Module in VM Pro for each DID. There is about 70 DID's and would hate to do this for each DID. Does anyone have a better solution?

 

[TouchToneTommy]

Hopefully your extension numbers match your DID numbers in some way.

Send the call to the module for the recording.
Set $CP0 to $DDI, the incoming DID routing digits
Maybe the digits match exactly, if so transfer to $CP0
Or maybe you need to extract the last 3 digits of $DDI and transfer to that

 

[shermosillo]

The provider is sending 10 digits. The extensions match the last 4 digits of DID. So I create a module that routes to a Generic action. Am I setting the Generic action to $DDI and the Transfer Action will be $CP0. How do I extract the digits?

 

[TouchToneTommy]

 

[shermosillo]

Thank You Sir. That did. I appreciate it.