I have a problem with DISA setting for TES 824

[spacetel]

Dear All,
I have PBX TES 824 and trying to configure DISA without AA.
1- OGM is recorded.
2- Code 414, 415, 416 is set to (CO1- DISA OGM-1).
3- Code 500 is set to Without AA.
the problem is when calling to CO1, DISA answered and OGM is coming but while pressing any extension (101 or 102,...), all extensions ring. Why is that? and to resolve the problem???

Thanks in advance...

 

[inlsp05]

uncheck mard incoming co in co1 co-incoming/outgoing.

http://telfonika.blogfa.com

 

[spacetel]

Thanks Bro,
but unfortunately, now the telephones not ringing even if I pressed (101 or 102 ...) from my mobile.
let me explain what I did using Panasonic PC software
1- 3.CO
2- 2.Incoming/outgoing.
3- Ringing for incoming CO Calls (uncheck mark from all extensions)

 

[Otoni]

Check With AA,

Then under AA Table,click 0[] then click Edit then select Extension where you want the call to go when someone Press "0"

I hope i understood your question

Also under, 3.CO -> 1.Line Mode, Type chose DISA with corresponding OGM number->

http://www.wanetelecoms.com

 

[spacetel]

I did what you wrote, Same problem.
After listening to omg, I dieled 0 for extension 101 all extensions ring.

 

[spacetel]

Dear All,
After searching a lot, the problem was from the Service Provider. because I did check with other service provider and every things work well.
Thanks to all