I get i long beep and 2 shorts and no image

[Dvdlr]

When i turn it on i simply get no image and no beeps or sometimes one long beep and two shorts and no image i checked the mem but it works fine but i move the procesor and sometimes it turn on fine but in some minutes freeze need help thanks

 

[Dvdlr]

i forgot its a celeron procesor mounted on a card the procesor its not in the motherboard directy thanks sorry for my english

 

[Visitor]

Check the documentation for POST/beep error codes, sounds like it might be the video card.

 

[butchrecon]

It is a video card. Make sure the card is seated well. Also try another Video Card. If its not seated fully you could have problems.

 

[NiteRuleR]

Thought an incorrectly seated video card was "1 long 3 short"

Try going to the site of your motherboard manufacturer and looking for the page that describes beep error codes... I think most motherbaord sites have them these days

 

[basweek]

Sounds like your Slot 1 adapter may not be fully seated. Sometimes they can be very tight. Don't push too hard, you could damage the motherboard from flexing it too much.

Good luck.