Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I Can't connect to my network

Status
Not open for further replies.

pyro

Technical User
May 1, 2002
12
US
Ok, I have a Netgear MA401 wireless card in my laptop with windows 2000 server. My router is a Netgear MR314. I have another computer on my network which is a pc with xp. I can not connect to the other computer at all. I can access the internet but any effort to connect to the other computer results in a message saying it could not be found.
 
It sounds like an IP issue. Are both PC's on the same network. Make sure they both have different IP addresses where the network is the same but the host part is different. i.e. 130.114.20.5 can connect to 130.114.20.6 where as the subnet and gateway are the same. Are you sitting behind a firewall or router. Are you running a private IP network. There are many things that can prevent this. Your best bet is to make sure you have the IP addresses and router configured correctly.

Hope this helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top