Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I can access share by IP but not by name...please help!

Status
Not open for further replies.

whoisthat

IS-IT--Management
Oct 19, 2005
22
US
Hi All,

Have any of you ran into this problem? Here is the situation:

I could ping server "A" using both name and ip address.
I can access shares on server "A" via ip address by putting \\10.1.1.198 in run command. However, I can't access it via name at all. I configured TCP/IP settings with two DNS servers and 2 WINS servers. This same information is used for other servers and I have no problem whatever. I'm having problem with this one and below is the error message when I tried to access it.

******************
\\ServerA is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.

Logon Failure: The target account name is incorrect.
*******************

Any help or suggestion would be greatly appreciated!

Thanks,
Henry
 
First, a little more info. What are the OS's? Is this a first time issue, or did it work before and stop working? Have you checked for error messages? Thanks and good luck.

Glen A. Johnson
If you like fun and sun, check out Tek-Tips Florida Forum
"Education is the best provision for old age."
Aristotles (384 BC-322 BC); Greek philosopher.
 
First, a little more info. What are the OS's? Is this a first time issue, or did it work before and stop working? Have you checked for error messages? Thanks and good luck.

Glen A. Johnson
If you like fun and sun, check out Tek-Tips Florida Forum
"Education is the best provision for old age."
Aristotles (384 BC-322 BC); Greek philosopher.
 
I have windows 2000 server. This is first time issue, it was working fine before and it just stopped.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top