I´ve to do a Remote expansion (G3R to G3Si)

[CHNascimento]

People I need to know all boards to do an expansion (G3R to G3Si) with Expansion Interface. By my research I found this packets to work like as an expansion control network:

Before, see the diagram:
http:// henrick.memebot.com/g3si-1.JPG

Below have the Sites and Boards to do that:

Site 1
_______________________________
Local RJ (G3R - MCC):
- Switch Node Interface (TN573B)
- Ds1 Converter (TN1654)

Site 2
_______________________________
Remote MG (G3Si - SCC):
- Exapansion Interface (TN570B)
- Ds1 Converter (TN1654)
- Maintenance (TN775)
- Tone Clock (TN2182B)


Please anybody can to verify if my are correct!!

(Stations and DS1 Interface I know and have no problems to implement)

Thanks for all help!!


CH ;-)

 

[4merAvaya]

In addition to the items listed you will need CSUs to connect the DS-1 circuits at each end. In the US we use Paradyne 3150 CSUs.

Kevin

 

[CHNascimento]

Ok thanks 4merAvaya!! I don´t know That Paradyne 3150 but I will find information about it.

Now I want to be sure about my cabinet (J58890N), that is possible to do a remote EPN with that model!! If so I will be free of my first problem!! I don´t know information in the avaya.com!!

Anybody can help us?

Thanks Masters!!

CH ;-)