Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hunt groups???

Status
Not open for further replies.

bagman330

Vendor
Jul 30, 2002
10
US
I have a question regarding hunting with dn's. is there an easy way to create a hunt group that will allow incomming calls to be distributed linear or all ring among 3-5 dn's? this is a mics.


 
Not sure what you mean by linear, But it could just be me and the beers I've had already tonight. Anyway the distribution modes for the Hunt Groups are: Broadcast- rings each set in the hunt groupsimultaneously; Sequential-starts the call at the first set in the hunt group and the distribution is complete when the first set has been found; Rotary-the call starts at the set after the one wich was last presented and distribution is complete when the next free set has been found. I hope this helps, if not just blame the beer. No really if it doesn't I will try to help some more or maybe someone else can help out, too.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top