HUNT GROUP

[ana1]

I have four phones that I need to put on a hunt group.

 

[johnpoole]

two ways to do it... ld 18 new ght.. with that you need a pilot number.. the quicker way is to chg the 1st set.. cls hta hunt xxxx to the second set then change the second to hunt xxxx to the next one in the chain

john poole
bellsouth business
columbia,sc

 

[djsanction]

Hi mate...just having a go with this myself and getting SCH0341 and SCH0101 (Unable to match input field with stored mnemonics.) - Just to confirm - This is whats happening, does it look correct ?

REQ: chg
TYPE: 3901
TN 12 0 7 8
ECHG yes
ITEM CLS HTA HUNT 2231 SCH0341
ITEM
SCH0101

Many thanks

 

[pronei]

HUNT is not a CLS, HTA is.

ITEM CLS HTA
ITEM HUNT 2231

Also, what initial post is refering to is a group hunt, not hunting on the set itself.

 

[djsanction]

Thanks pronei..

 

[djsanction]

Hopefully I'm understanding this correctly but its not behaving the way I had thought..not a huge deal of experience with TTY so I'll apologise now.

The request from the users is for four phones to overflow to eachother in turn. i.e call one DN 2300, if no ans call the second DN 2231 and so on...

Would this be a good way to do it or would you say CFNA is the better option ? or perhaps even a fullon hunt group in ld18?

Cheers for the assistance..

 

[SL1M1]

If your only talking 4 phones and given you have limited knowledge on CLI/TTY, I would suggest just change each extns profiles

LD 20 or 11
REQ CHG
TYPE 3901
TN (X X X X)
ECHG YES
ITEM CLS HTA FNA
ITEM EHT xxxx
ITEM EFD xxxx
ITEM FDN xxxx
ITEM HUNT xxxx
RETURN OUT

Cheers!!