Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hunt Group - Issue with Announce

Status
Not open for further replies.

Bolzplatzk1nd

Technical User
Oct 17, 2014
22
DE
Hey,

Customer configured 1st and 2nd Announce.

When we try it, we hear nothing and in the SSA is an Alert:
"An attempt was made to use a function for which no license has been installed.
License type: IP500 Voice Networking Channels ".

- Version: 9.1.1.0 Build 10
- 1x Combo Card
- Embedded Voicemail

It is an small IPO with no special things.

We had that Problem never before.

Does anyone have similar problems and an idea to solve this Problem???

Thanks!

 
So you have enabled the announcement for the hunt group.
Have you recorded the announcements.
*91 huntgroup #
*92 huntgroup #

Saved after the beep.
 
It was not the first time we configured that." - but you didn't configure it, the 'customer' did. So go delete whatever they did and program it up yourself before asking for help. Otherwise it's the programming equivalent of Chinese whispers.

Stuck in a never ending cycle of file copying.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top