Hunt Group DN's are Blank on BCM450 Help!

[nooop]

I am setting up hunt groups, but found the DNs for hunt groups missing? I tried to add an unused application DN, and it did not work? Do I try to configure applications in telephony resources? I don't want to mess up voicemail if possible.

Thanks

Tony

 

[telcodog]

I do believe that you have to configure them just as you do the DNs, trunks etc on the 450. No real default anymore on these babies.

 

[cook1082]

I would try set DN's.

 

[SupportDude]

1 Click Configuration > Telephony > Hunt Groups.
2 On the Hunt Groups table, select the hunt group you want to configure.
3 Fill out the columns across the table as required.

HG = This number identifies the hunt group to the system. This is also the number assigned to the telephone, when you add the telephone as a Hunt Group member. <01-30>

Name = Enter a logical name that describes the group function. This name also acts as calling line display for incoming calls.<alphanumeric>

DN = Add a DN. The DN number can be assigned to memory buttons on telephones that are not part of the hunt group.



-SD-

http://www.mysupportguy.net

 

[gberger]

Set dn's won't work.Assign any non-existing dn, the one that say "invalid" and not "not in service".