Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HTS32
- Thread starter cheikhdtn
- Start date
Reset procedure:
1) Press and HOLD "Initialize" button
2) Switch the Power ON
3) Look at the "Status" LED
3a) LED has to turn Amber (ON) for about 4 sec
3b) LED has to turn Amber (flashes rapidly)
3c) LED has to turn Green (flashes rapidly)
4) Release "Initialize" button
5) Wait for about 1 minute -> "Status" LED has to turn Green (ON).
1) Press and HOLD "Initialize" button
2) Switch the Power ON
3) Look at the "Status" LED
3a) LED has to turn Amber (ON) for about 4 sec
3b) LED has to turn Amber (flashes rapidly)
3c) LED has to turn Green (flashes rapidly)
4) Release "Initialize" button
5) Wait for about 1 minute -> "Status" LED has to turn Green (ON).
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question