Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HTS32

Status
Not open for further replies.

cheikhdtn

Technical User
May 17, 2018
99
DZ
HI

I have KX-hts32 .when I turn it on its lamb status is Red.not flaking.no tone
I can't access with IP ADDRESS.I try to reset but no use.
I can't reset.
Can you help me to solve this problem?
 
Reset procedure:
1) Press and HOLD "Initialize" button
2) Switch the Power ON
3) Look at the "Status" LED
3a) LED has to turn Amber (ON) for about 4 sec
3b) LED has to turn Amber (flashes rapidly)
3c) LED has to turn Green (flashes rapidly)
4) Release "Initialize" button
5) Wait for about 1 minute -> "Status" LED has to turn Green (ON).
 
Thanks Ired
I did all these steps but still nothing. The status remains red.
 
Seems like PBX malfunction. Take it to repair service.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top