Hi for all panasonic people there.. please anyone have any file refer to hts32 setup..? i have one with kx-hd330 ip phone and i wonder if i have to do anything in phone setting in order to regist this phone into network.. For more info.. I connect hts32 wan port with my router and lan port for hts32 with my switch and connect ip phone with switch. So is this good..? Or i also have to do more other things..? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hts 32 phone registration
- Thread starter Ali. Ibra
- Start date
obtsystems
Programmer
I have never see that system. Didn’t come out over here. Sorry
Ali. Ibra
There is a Panasonic channel at youtube and you can search by "HTS" keyword onto this channel and can to find a lot of learning video about HTS system.
You are welcome!
There is a Panasonic channel at youtube and you can search by "HTS" keyword onto this channel and can to find a lot of learning video about HTS system.
You are welcome!
- Thread starter
- #4
The PBX has to be connected either via LAN or WAN1 port into the local network and also the IP address must be fixed (not via DHCP). Then you just connect the phone to the network and wait a while, provisioning should be automatic.
See this video:
You need to have firmware version 1.6 or newer. For older firmware, you have to set some additional settings if the PBX is connected via WAN1:
See this video:
You need to have firmware version 1.6 or newer. For older firmware, you have to set some additional settings if the PBX is connected via WAN1:
- Status
