Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

hp4plus error52

Status
Not open for further replies.
tech600

tech600

Technical User
Oct 25, 2001
4
US
I have an hp4plus with an error 52. I replaced the laser unit but the error still returns. Any other suggestions ?
 
Sort by date Sort by votes
There was a problem with the cables on som units, but usually it is the DC Controller that's the problem. Have you replaced that yet?
 
Upvote 0 Downvote
I replaced the dc controller board and the two cables between the laser unit and the dc controller. I'm going to send the laser unit back and see if it's defective because it sounds different just before the 52 code. Thanks for the reply.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top