HP StorageWorks DAT24 DDS3 - What lead do I need?

[gavm99]

Hi all,

Hopefully an easy one for someone this.

I have a HP StorageWorks DAT24 DDS3 External Tape Drive and I want to attach it to my Adaptec AHA-2940 SCSI card.

The problem is I am confused as to what lead I need!

I have seen there are SCSI 1,2 and 3 leads.

I know the external connector on the Adaptec card is 68 Pin if that helps.

If someone could maybe post a link to the lead I need that would be great!!

 

[TekGeek555]

Hey Gavm,

I'm pretty sure what you need is a external "Centronics to Wide SCSI" cable. Go to google.com and select images. Then type in "external centronics to wide cable". You will find what you need there.

Here is a link to a product page of the cable you need:

http://www.span.com/catalog/product...=2430&osCsid=5643c3d3374e6ad63a074628790663d3