I am trying to install a Officejet onto a HP Vectra with W2K. I am using a USB 2.0 connection. This should be a plug n play installation but after I plug the USB cable to the HP in starts to run the install and then I get this error at the end "The name is already in use by either a service name or a service display name". Now, I took this printer to my Compaq Evo D510 and plugged the cable in and it installed right away. My Compaq also has the new 2.0 USB connection but the HP does not. Could this be the reason? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP Officejet G55 not installing
- Thread starter civic5
- Start date
ptrigueira
Technical User
No, I don't think that's the problem. Try to run the latest software available (insure you remove the old one first) and reboot the system. Only connect the USB cable when the system asks for it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question