HP Management Port 1

[CaptainDoogles]

I have a HP 4104gl switch that I am tagging / trunking to a Cisco 3560. I figured out how to truck the switches for data but I have a vlan 25 that is the management VLAN for the cisco / network devices in the building. The trunk native vlan is 50. I am unable to connect to the vlan 25 vlan IP interface.

Maybe I do not have the truck between the 2 devices correct even. Could some one explain to me how to get this to work. I only have 2 of these devices on the network and I will be up against this problems again.

Cisco config
f0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonego
switchport trunk Native vlan 50


HP 4104gl

ip default-gateway 192.168.200.254

vlan 1
name "DEFAULT_VLAN"
ip address dhcp-bootp
no untagged A1-A24
exit
vlan 50
name "NATIVE_VLAN"
untagged A1
exit
vlan 20
name "FRA-DATA"
untagged A2-A24
tagged A1
exit
vlan 25
name "Management"
ip address 192.168.200.11 255.255.255.0
exit
password manager
password operator

 

[unclerico]

add vlan 25 tagged a1

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[CaptainDoogles]

They are not angry, just excited to see me =}

I will do that tomorrow morning and give you an update.

 

[CaptainDoogles]

Works great thank you for the help.