Trying to plot out a drawing that is done in paper space. There are four sheets and the first sheet prints out fine in landscape. When the next three sheet print they all print in in portrait. All the plot settings are exactly the same as the first sheet. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP CP1700 Printer Problem
- Thread starter oldgunny
- Start date
- Thread starter
- #3
Auto oldgunny,
If you haven't already, go to discussion.autodesk.com with your newsreader or to Autodesk's website that carries the newgroups @
There is a printing & plotting group in the Autocad support area. Searh first as there is a wealth of info there. If you don't find your answer, post with OS, Acad version, plotter along with the problem.
If you are in 2004, you can select all tabs and print once with the same settings.
Pat
If you haven't already, go to discussion.autodesk.com with your newsreader or to Autodesk's website that carries the newgroups @
There is a printing & plotting group in the Autocad support area. Searh first as there is a wealth of info there. If you don't find your answer, post with OS, Acad version, plotter along with the problem.
If you are in 2004, you can select all tabs and print once with the same settings.
Pat
- Status
Similar threads
