Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP 4600 error 59.90

Status
Not open for further replies.

CityofHeroes

Technical User
Apr 6, 2005
15
US
The current display says error 59.90. When I display all the errors it displays 59.90 and 54.19. The errors say to replace the DC controller card (error 54.19) and Image Transfer Kit(error 59.90). I have replaced all required parts needed to fix this printer (from error codes displayed), but I still get the same error when booting up printer.

Thanks

disregard last thread I posted. I gave wrong error code.
 
Well I found out that the wire connected to the drawer connector was disconnected. I replaced the drawer connector (which was about 6.00) and re-plugged the wire.

:)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top