I know very little about the configuration/diagnostic of Printers. I have an HP2300dn in my office and it was moved. Now, when it prints the contrast is way too light. I tried replacing the toner, but it did not work. Any suggestions on how to make it print darker?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hp 2300
- Thread starter roadkilll
- Start date
bisawest
Technical User
- Jan 21, 2005
- 82
You should be able to adjust it in the settings. I don't remember exactly, but it will probably be in the Print Quality menu. There is also an economode which should be set to off. You should be able to adjust the toner density in the Print Quality menu, the higher the number, the darker the print. Also, are you using OEM or Reman toners? Is this printer in a dirty environment? If so, the laser lenses could be dirty, which would cause light print. Good Luck!
Have a nice day today, and a better day tomorrow!!!
Have a nice day today, and a better day tomorrow!!!
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question